WARE & CO. EXTERIORS

Scroll to build your roof.

Every layer, in order, exactly as it goes on the house. No guessing what's under the shingles.

STEP ONE

Re-roof or new build?

Changes where the build sequence starts.

STEP TWO

Which one looks like your roof?

Pick the closest match — the build visual and the estimate below both adjust to it.

01

Tear-off

Old shingles, underlayment, and flashing stripped down to bare deck. Every board gets inspected before anything new goes back on.

02

Deck repair

Soft or delaminated sheathing replaced. No new roof goes over a compromised deck — this is where callbacks get prevented.

03

Ice & water shield

Self-adhered membrane running a full 36 inches up from every eave edge, plus full coverage in every valley — the last line of defense against ice damming and wind-driven rain, right where Utah winters attack first.

04

Synthetic underlayment

Full-deck coverage. Secondary water barrier that also protects the deck during install before the final layer goes down.

05

Pipe boots & flashing

New boots on every penetration, new step and counter flashing at walls and chimneys. The most common leak points, done right the first time.

06

Choose your finish

Same build underneath — the finish layer is where look, warranty, and price separate.

07

Choose your color

Applies to the HDZ and UHDZ lines. Sequoia, metal, and tile each have their own separate color options — ask for those swatches directly.

08

Upgrades

Add-ons that change how the roof performs and looks — stack any combination.

BALLPARK ESTIMATE

What's this roof likely to cost?

Answer a few questions about the home. This gives a rough range — not a quote.

Total finished square footage

2,200 sqft

Rough is fine — check your listing or county assessor site if you're not sure.

Existing layers to remove

Stories

Steepness (pitch)

Roof complexity

Matches the roof type you picked above — change it here if you want to compare.

Roof features

Finish material

Upgrades

Discount code

ESTIMATED RANGE

$5,500$6,700

Standard pricing

Calculated roof area~1,065 sqft
MaterialHDZ
Labor & access adj.+8%
Roof featuresFew
UpgradesNone
Margin tierStandard pricing

Ballpark only. Final number depends on an on-site inspection — deck condition, code requirements, and exact roof geometry all move the price.

SCHEDULE AN INSPECTION

READY FOR A REAL NUMBER?

The ballpark is free. So is the inspection.

A 30-minute on-site inspection turns this range into a firm quote — deck condition, exact measurements, and code requirements included.

BOOK A FREE INSPECTION

Estimates from this tool are ballpark ranges only and are not a quote or contract. Final pricing is set after an on-site inspection.